Economic feasibility study of organic and conventional fish farming systems of Indian major carps.

Organic aquaculture is a new approach in the modern farming system. As the capital investment is higher for setting up the organic aquaculture, it is essential to conduct an economic feasibility study with compare the conventional farming system. In the current study, economic feasibility of culturing Indian major carps (IMC) using conventional culture system and organic culture system (OCS) were evaluated. IMC was cultured for three consecutive years from 2017 to 2019 in experimental ponds of 0.015 hectare (ha) area each. The crude protein content of the organic and conventional feed was maintained at the same iso-nitrogenous level (32% crude protein) but the highest production to the tune of 19 tons per ha was obtained in OCS. Further, in case of OCS, apart from fish production, vermicomposting to the tune of 45,000 kg ha-1 in the first year, and 90,000 kg ha-1 from second year onward is achievable by installing a vermicomposting unit of 200 tons annual capacity. Economic analysis of the culture systems assuming a project period of 10 years showed that the highest net present value (NPV) of 1.06 million USD, a payback period of one year and nine months and an internal rate of return (IRR) of 51% are achievable per ha of fish culture pond for OCS. Sensitivity analysis of various costs performed for OCS revealed that profitability of the organic fish farming investment is most sensitive to the total fish production and sale price of the organic fishes. In terms of production of fish and economics of organic culture system is proved to be the best available technique.

Economic feasibility study of aerators in aquaculture using life cycle costing (LCC) approach.

Selection of aerator is a very important aspect in aquaculture operations. The selected aerator must be economically efficient and should be able to fulfil the requirement of oxygen supply in the pond water. In the present study, economic feasibility of nine different types of aerators, namely, perforated pooled circular stepped cascade (PPCSC), pooled circular stepped cascade (PCSC), circular stepped cascade (CSC), paddle wheel (PWA), spiral aerator (SA), propeller-aspirator-pump (PAA), submersible (SUBA), impeller aerator (IA) and air-jet aerator (AJA) was assessed based on capitalization method, a life cycle costing (LCC) approach. The results revealed that the PPCSC aerator can be considered as the most suitable aerator when dissolved oxygen (DO) content in the pond water is less than equal to 3 mg/L, and pond water volume (V) is less than 2100 m3. In other situations, mostly when pond water volume is more, IA proves to be the most suitable aerator, followed by PWA, PPCSC, and other available aerators. The sensitivity analysis conducted by using varying stocking density and capital cost also showed the same trend with regard to selection of aerators. This life cycle costing approach for selection of aerator can be implemented for any types of cultured species at any prevailing environmental conditions.

Aeration characteristics of a rectangular stepped cascade system.

Aeration experiments, maintaining nappe flow conditions, were carried out on a rectangular stepped cascade of total height 3.0 m to determine the total number of steps, slope of the entire cascade and hydraulic loading rate at which maximum overall aeration efficiency occurs, keeping the surface area of individual steps constant. Based on dimensional analysis, the overall aeration efficiency at standard conditions (E(20)) was expressed as a function of square of total number of steps (N(2)) and dimensionless discharge (d(c)/h), where d(c) and h represent critical depth in a rectangular prismatic channel and individual step height respectively. An empirical equation with E(20) as the response and N(2) and d(c)/h as the independent parameters was developed based on the experimental results subject to 36